1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

MPR-50 Multi-port Router

The MPR-50 Multi-port router can connect two, three, or four 78kbps twisted-pair free-topology channels, and it can connect these channels to a high-speed 1.25Mbps twisted-pair backbone. Used in any multi-channel control network installation, the MPR-50 router substantially reduces installation time and cost.

  • High-performance, low-cost; Cuts control network installation time and cost
  • Flexible power input: 9–28Vac and 9–35Vdc
  • DIN rail, wall, or panel mount
  • Channel access through front panel phone jacks; Includes local status display LEDs and remotely reports status and faults
  • Intelligent repeater mode

MPR-50 routers can be installed by any standard LonWorks® network commissioning tool including the LonMaker® Integration Tool. Custom shapes are available for the LonMaker tool that simplify installation of MPR-50 routers.

For more complete specifications and ordering information see the MPR-50 datasheet (PDF).

Router 1 transceiver: TP/XF-1250 (LonMark® standard channel type)

Router 2–5 transceivers: TP/FT-10 (ISO/IEC 14908-2, ANSI/CEA-709.3, and LonMark standard channel type), link-power compatible

Operating input voltage: 9–28Vac 40–70Hz, 9–35Vdc

Operating input current 500mA max LED indicators: Power (one—green), Status (six—green, yellow, or amber)

Dimensions: 157.5mm (9 TE) wide, 80mm high, 80mm deep

Electromagnetic capability: FCC Part 15 Level B, EN55022 Class B, EN55024, CISPR 22 Class B, VCCI Class B

Agency listings: U.L. 60950, cU.L. C22.2 No. 60950-00, TÜV EN60950, CE, C-Tick